- The mattress had accumulated much more dirt than expected.
- Very easy to use: plug in, clean and empty.
- Ideal for mattresses, pillows and quilted fabrics.
- Less comfortable in tight spaces like those in a car.
There are things we clean constantly at home: the floor, the furniture, the kitchen, the bathroom… but there's one surface we spend roughly a third of our lives on, and let's be honest, Almost nobody does a deep clean.: the mattress.
In my case, I change the sheets, air out the room, and occasionally flip the mattress, but I'd never done a proper, deep clean. And after asking several people I know, the answers were pretty similar: Almost nobody cleans the mattress thoroughly..
So a rather simple question arose for me: Does a seemingly clean mattress really accumulate that much dirt? To verify this, I've been testing the JIMMY BX7 Pro Max, a vacuum cleaner specifically designed for mattresses, pillows, sofas and other upholstered fabrics.
What is the JIMMY BX7 Pro Max?
https://www.youtube.com/watch?v=SfS_8ZnNS3I
The JIMMY BX7 Pro Max is a vacuum cleaner specifically designed for cleaning mattresses and textile surfacesIt is not a conventional vacuum cleaner, but a device designed to work on fabrics where fine dust, hair, skin flakes, mites and dirt that we do not normally see with the naked eye can accumulate.
To achieve this, it combines several functions: suction, high-frequency tapping, ultraviolet light, hot air, and intelligent dust sensorThat might sound very technical, but the idea is simple: Lift the dirt trapped in the fabric and vacuum it up. more effectively than with a superficial pass.
La UV light is designed for activate during use and deactivate automatically When the device loses contact with the surface, a safety measure designed to protect the user's eyesight. Furthermore, The smart sensor changes color depending on the dirt detected.allowing you to identify at a glance which areas need more work and which are already properly cleaned.
It has a hammering systemwhich is one of the most important parts since It helps lift fine dust and dirt trapped in the fabricThis is partly thanks to the included brush, which combines rubber bands and soft bristles for Lift dirt without damaging fabricsAnd obviously, that's in addition to everything else. the aspiration, which collects everything that the surface releases.
It also incorporates a cyclonic filtration system which helps maintain consistent suction power by separating dust particles from the airflow. It also incorporates heat using graphenewhich is noticeable during use. According to the brand, this system helps heat penetrate deeper into mattresses and quilted fabrics. hinder the reappearance of mites and bacteria.
In fact, one must have a certain Caution with the bottom of the deviceBecause some areas get quite hot. It's not a cause for concern if you use it correctly, but it is It is advisable to avoid touching the hot area. right after using it.
Unboxing and setup
So, before we test it, let's see what's in the box. Inside the box We found the vacuum cleaner itself, the instruction manual, a tool for cleaning the tank, and a replacement filter..
There's nothing to assemble or configure. It's as simple as taking the device out of the box, plugging it in, and starting to use it.And this is much appreciated, because it's not one of those products that forces you to read half a guide before you can try it.
I also liked that The cable is quite long.I haven't measured it to the millimeter, but it's around Approximately 5 metersSo it allows you to move around the bed quite comfortably even if you don't have a socket right next to you.
First test: my main mattress
I did the first test on my main mattress, a double mattress that I use daily And visually, it looked clean. It had no stains, no visible dust, and didn't give the impression of needing an urgent cleaning. But that was precisely the interesting part. Because If a mattress looks clean, but the device manages to extract dirt, then it starts to make sense..
After several passes with the JIMMY BX7 Pro Max, the key moment arrived: open the depositAnd I have to admit that The result is quite impressive.I'm not just talking about a few stray bits of lint. I'm talking about very fine dust, hairs and a kind of grayish accumulation that remains in the deposit and which I honestly didn't expect to see in that quantity.
And that's where the perception changes quite a bit. Because I don't know if all that is dust mites, skin flakes, dust, or a mixture of everything, but what I do know is that That was on a mattress I sleep on every night.
Second test: another older mattress
To check if the result was a one-off occurrence, I repeated the test on another, older mattress at home. than the first one. And here the result was even clearer.
La the amount of dirt that came out was greaterWhich makes sense considering it's a mattress that's been used for several years. Again, visually it didn't seem particularly dirty, but the reservoir told a different story.
This is what has most changed my opinion about these types of appliances. It's not so much what they promise in the technical specifications, but what you see when you finish cleaning. There is dirt that is not visible to the naked eye, but it is there..
Beyond the mattress: I also tried it in the car
After seeing what came out of the mattresses, too I wanted to try it on the car seatswhich are made of fabric. And this seemed like an interesting test to me because it's another place where we spend quite a bit of time and that we don't usually clean thoroughly.
The result was positive, but with some caveats. The device It managed to collect dirt and dust from the upholstery.But one of its limitations is also noticeable: the head is quite wide.
That's a huge advantage with mattresses, because you cover a large area with just a few passes. But in the car it can be a little less convenient, especially in tight corners or between the seats. I don't see it as a problem with the product, because It's not really designed as a car vacuum cleanerBut it is something to keep in mind.
Also I tested it on a new sofa with a surface similar to synthetic leather.I was expecting less of a result here, and that's what I got. This type of surface is much more closed and hard, so Dirt doesn't get in the same way as it does in a mattress.a pillow or fabric upholstery. In this case, the JIMMY BX7 Pro Max doesn't make much sense.
And I think it's important to say this, because not all tissues are the same. This product makes much more sense on mattresses, pillows, fabric seats, and padded surfaces. than in hard or closed materials such as faux leather.
Emptying and maintenance
One of the things I liked most is that Emptying the tank is very simpleYou just need to remove it by pressing the button on the reservoir, turning it to open it, and taking out the filter. Once you've done that, you're all set. you will be able to throw away the accumulated dirtOnce you have emptied the tank, simply replace it and fit it back into the appliance; it's that easy, it won't even take a minute.
This is important because, after using it on a mattress, The reservoir can accumulate quite a bit of fine dust.And it's not exactly pleasant dirt to look at, to be honest. But that's precisely why the product is so compelling: because you can clearly see what it's removing. It also includes a tool to help clean the tank and filter itself.
The deposit is interesting, which It can be washed directly with water to facilitate maintenance. That said, it is It is important to make sure it is completely dry before putting it back in place. on the device.
Conclusion: Is it worth it?
The best:
- Es effective at removing invisible dirt of mattresses.
- Very easy to usePlug in and start.
- El long cable It makes cleaning large beds easier without changing the plug.
- El The tank is easy to empty..
Worst:
- El A wide head is not ideal for tight corners., like some car seats.
- It does not have a cable rewind system.
- Must have Be careful with the hot lower area after use.
After several days of using the JIMMY BX7 Pro Max, my opinion is pretty clear: Yes, I think it's a very interesting product. If you want to keep mattresses, pillows, and upholstery cleaner. In fact, the The BX7 Pro Max is certified by the UK Allergy Foundation, a particularly interesting feature for people with allergies or dust sensitivities.
While I can't say for sure how many mites it eliminates or if it actually gets rid of all the bacteria the manufacturer claims, I can say one thing for sure: It has removed an amount of dirt from my mattresses that I didn't know was there.And that, for me, is what's important.
After seeing the fine dust, hair, and debris that accumulates in the dustbin, I know for sure that I'm going to start cleaning the mattresses much more often. Because in the end That dirt was there, beneath us, even though it wasn't visible..
So if you're looking for a specific device for mattresses, pillows, fabric upholstery, or padded surfaces, the JIMMY BX7 Pro Max it seems to me a Highly recommended toolIt doesn't replace a traditional vacuum cleaner for the whole house, but it does cover a need that we usually overlook, especially if you live with pets, allergy sufferers, or simply want to keep the textiles you spend so many hours on every day cleaner.
Plus, you now have a discount available: from From June 30th to July 19th you can get a 20% discount on the JIMMY BX7 Pro Max using the code DIBEWT5F when making your purchase.