How to clean the mobile phone case in 5 easy steps?

How to clean the mobile case

When we buy a new mobile, before even installing the first application, we must protect it with a cover. Mobile phone cases are very important accessories to preserve the appearance of the device and to prevent damage that can be caused by accidental impacts. However, it is not a secret that over time, depending on the material, they tend to deteriorate and look very bad. For this reason, today we want to show you how to clean the mobile phone case with a really simple process and with tools that we have at home..

In this way, you will be able to give your cover the original appearance that it originally had and you will save a good amount of money because you will not have to buy a new one. If your cover has stains or dirt buildup, the steps below will help give it a breath of fresh air.

How to clean the mobile case?

How to clean the mobile phone case is something quite simple, but for which we need to be very careful. This is due to the fact that if we use certain products, we could end up damaging the material of the cover. Likewise, it is important to carry out the steps to the letter in order to avoid affecting the device as well.

Here we show you the 5 steps to make your equipment case shine.

Step 1 – Identify the cover material

Our first step in the process of how to clean the mobile phone case is to identify its manufacturing material. This is essential to choose the products that we will use to clean, since we cannot treat a plastic cover and a rubber cover in the same way.

The most common covers on the market are usually made of silicone, plastic, rubber and we can even find alternatives in wood. Take this aspect into account before making the decision to use a certain soap or brush

Step 2: Remove the phone case

This step might seem obvious, however, it is necessary to mention it because it is part of the process and because we must avoid doing any type of maintenance to the case at all costs, with the mobile present. During the task of removing it, try to do it carefully in order to prevent any damage, something quite usual in plastic covers.

Step 3 - Clean the case

Now we will fully enter the matter about cleaning the cover and for this, as we mentioned in step 1, we are going to consider its material. However, it is worth noting that, in all cases, it will be very useful to have microfiber cloths.

Silicone and rubber sleeves

If your cover is made of rubber, you can use the following products or ingredients:

  • Liquid soap, dishwasher or similar.
  • Isopropyl alcohol.
  • Sodium bicarbonate.
  • Hot water.
  • Toothbrush.

In this case, what we will do is have a container with hot water on hand, and another with any of the first 3 products that we mentioned before.. Distribute it over the entire length of the cover, then dip the brush in the hot water and begin brushing the entire area.

Rubber covers, in particular, tend to have accumulated dust in various areas, so it is worth soaking them for 30 minutes in soapy water, before brushing them.

plastic sleeves

Plastic covers usually have a little more resistance, so we can use a product like bleach. However, this must be done with great care, using gloves and, in addition, we must dilute it in a ratio of 1 part bleach to 20 parts water.. In another container, add water, soap, and the diluted bleach mixture, then soak the cover for 30 minutes.

Next, brush the entire cover and you will see how all the dirt begins to come out easily, thanks to the action of the bleach.

Step 4 - Dry the Cover

The last step in this process is to let the cover dry, for which we recommend placing it up and down for half an hour, in a dry and warm place.. This step is essential, since if we do not allow it to dry properly, the residues of water or the products used could come into contact with the mobile with the risk of damaging the casing.

Once the case is dry, put it back on the device and you're done.

How to clean the mobile phone case is essential knowledge for any user in order to preserve its good appearance and extend its useful life. With these 4 simple steps you can give a new life to your case and avoid buying a new one, in addition, your mobile will continue to have the protection it always has, since maintenance does not weaken it.

If you don't have a case for your device, we recommend purchasing one right away to keep your device looking as good as it did on the first day. This will give you the possibility to give it away later, sell it or simply keep it for a long time.

The content of the article adheres to our principles of editorial ethics. To report an error click here!.

Be the first to comment

Leave a Comment

Your email address will not be published. Required fields are marked with *



  1. Responsible for the data: Miguel Ángel Gatón
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.