All of us who use the computer have a wish: that the PC runs faster, that it does not crash and that it does not make us waste time between crashes and the slow pace that it often has. It is true that our use greatly influences how the computer performs and we often fill it with elements that slow down its performance. But there is a possible simple solution to this problem. Clone hard drive to SSD It can help us make the computer faster and more efficient.
Many users are already doing it, changing from the traditional hard drive to a much more advanced SSD that offers a better experience. Doing this will take you a while, but it is much simpler than you are thinking and does not involve great complexity or, of course, we are here to answer your questions and guide you step by step.
Have you decided to try the experience and clone the hard drive to SSD yourself? Well, keep reading and you will see how easy the process is with our guide that is made for you.
What do you have to do BEFORE proceeding to clone the hard drive to SSD?
Before proceeding with the process of clone hard drive to SSD, you have to make some preparations. It is basically about checking that our computer meets the necessary requirements to carry out cloning. And to choose the appropriate software to proceed with the execution. Let's look at this in a little more detail.
Does your computer meet the requirements to clone the hard drive to SSD?
To clone, you will need to have the Target SSD and an adapter if your computer does not have space to accommodate two hard drives simultaneously. In addition, look for a cloning system that you trust.
What software to choose to clone hard drive to SSD?
The next question to ask is what software to choose. You should also not trust the first one you see and it is advisable to listen to the opinion of experts who advise you on a program that they have already tried and that has given good results. If it goes wrong, the consequences could be fatal, because you would lose information on your PC. We don't want that!
Some recommendations are Iperius Backup, AOMEI Backupper Standard and Clozenilla. Try and do a little research about each one, to stick with the one that gives you the best results or is easiest for you to use.
Save your data well
Once you have everything and, before starting the cloning process, make sure to carefully review all your data and put your important files safely away. Cloning should go well, but nevertheless, it is something we will do for the first time and you never know what problems may arise. It is better prevent. Beam Backup on a CD, a pendrive or in a cloud, of what you don't want to lose no matter what happens.
How to clone your hard drive to SSD step by step
Now, checks done and everything ready, we are going to take the step to clone hard drive to SSD at last. Do the following:
- Connect the SSD to the computer. For this, you may need an adapter. Once connected, wait for the PC to recognize the device.
- Now, it's time to choose the source and destination disks. To do this, open the cloning program and select the hard drives you have as source and destination. Be careful to select well, if you don't want a disaster to occur.
- The process of cloning your files will begin. We warn you that if you have a lot of data or it is voluminous, it will take time. And during this time it is vital that you do not touch anything or anything happen that could interrupt the cloning and the transfer of data to the new drive.
Has the process already finished? All good? Brilliant! Let's move on to the next stage of the process to clone a hard drive to SSD.
Second phase, Optimization stage
The hard drive to SSD cloning process has already been completed and everything went perfectly. But we're not done yet, because there are still a few more issues to solve. Above all, we have to optimize.
Don't worry! That the important and complicated thing has already been done. Now we will have to configure the boot sequence, verify cloning and optimize the SSD. Let's see how this is done.
How to configure the Bios boot sequence?
In order for your computer to recognize the new SSD and use it as its primary hard drive, you may need to configure the BIOS boot sequence.
Check that everything is correct after the cloning process
Once the cloning is done, check that everything is correct, that all your programs and files appear and nothing was left behind. If the cloning went well, everything should be in place.
Correctly optimize the SSD
Now that you have cloned your SSD, you will want it to last as long as possible and in the best conditions. To do this, you can help the system by activating TRIM optimization.
What problems may arise during cloning your hard drive to SSD?
Nothing has to go wrong, but this does not mean that sometimes something unforeseen does not happen and the process becomes difficult. For example:
- It may happen that the computer does not recognize the SSD. If this happens, check that the devices are connected correctly and adjust the boot sequence in the BIOS.
- If you have lost data, we already know that when this happens it is a disaster. Something went wrong, it's clear. But, if you made backup copies prior to the cloning process, you can restore that data from those copies.
- Does the performance of your now leave something to be desired? You installed the SSD with all the fuss that this entails and now it turns out that your computer's performance is not as spectacular as you expected. It is strange, because generally, the performance is much higher. But, check that the drivers are updated and also perform an optimization. Now him computer should run faster.
With these guidelines, clone your hard drive to SSD It should not present any inconvenience and, rather, the advantages of a computer with better performance.